Fire Damage Repair Permits and Inspections: What the Building Department Requires

After a fire, it can be tempting to get repairs done as fast as possible without dealing with the building department. For anything beyond cleaning and cosmetic work, that is usually a mistake. Fire repairs typically involve structural, electrical and mechanical work that requires permits and inspections, and the permit process is also where code upgrades get identified, which matters for your insurance claim.
Do you need a permit to repair fire damage?
Rules depend on your city or county, but most jurisdictions require permits for:
- Structural repairs: replacing framing, joists, rafters, beams or load-bearing walls.
- Electrical work: replacing wiring, circuits, panels or service equipment.
- Plumbing and gas lines that were damaged or need to be moved.
- HVAC replacement or major duct work.
- Roofing replacement in many areas.
- Demolition of a structure, or a large part of it.
Cleaning, painting and like-for-like replacement of finishes often do not need a permit, but check with your local building department before assuming so.
The building department may get involved anyway
After a significant fire, the fire department often notifies the building department. Inspectors may post the property as unsafe or restrict occupancy until repairs are inspected. In some areas, a structure that is severely damaged must be secured, repaired or demolished within a set time. If your home was posted, keep a copy of every notice. They help prove living expenses and the need for specific work.
How permits lead to code upgrades
When you pull a permit, the repaired work generally must meet the current building code, not the code from when the house was built. Common fire-related upgrades include arc-fault and ground-fault electrical protection, hardwired interconnected smoke alarms, current insulation levels, egress windows in bedrooms, and, in wildfire areas, ignition-resistant materials.
Those added costs are generally covered by ordinance or law coverage, which is separate from the dwelling limit. The standard homeowners form provides up to 10% of the dwelling limit, and higher limits are available by endorsement. See ordinance or law coverage after a fire.
Permit documents to keep for your claim
- The permit application and the approved plans.
- Plan review comments listing required changes.
- Inspection reports and correction notices.
- Any letter from the building official explaining what must be upgraded and why.
- The final inspection or certificate of occupancy.
Send copies to your adjuster as you receive them, especially anything that requires work not in the insurer's estimate. Code-driven items found this way are a common reason for claim supplements.
Permit fees and the claim
Permit fees, plan review fees and the cost of drawings or engineering required for the permit are part of the cost of repair. Make sure the estimate includes them. Insurer estimates sometimes leave them out.
Why skipping permits can cost you
- Inspection protects you. Fire repairs involve hidden systems. An inspector catches unsafe work before it is covered up.
- Code upgrades go unclaimed. Without a permit, the code requirements are never identified, and the coverage designed to pay for them goes unused.
- Future problems. Unpermitted work can complicate a sale, a refinance, or a future insurance claim.
- Recoverable depreciation. Insurers often ask for proof that repairs were completed, and a final inspection is strong proof. See recoverable depreciation after a fire.
Permit delays and living expenses
Permit backlogs, especially after large disasters, can add months to a rebuild. Document the delays and send them to your insurer when asking to extend living expenses. See additional living expenses after a house fire.
Who pulls the permit
In most cases the licensed contractor pulls the permit and schedules inspections. Some areas let homeowners pull permits for their own work, but then you take on responsibility for meeting code. A licensed contractor who pulls permits also helps with your mortgage company, which often asks for the contractor's license and insurance before it releases repair money. See mortgage company holding the insurance check.
Demolition permits and debris removal
If part of the house must come down, a demolition permit is often needed before work starts. Utility disconnections and disposal rules can also apply. These costs are part of the loss. Debris removal is included in the standard homeowners policy, and if the dwelling limit runs out, an extra 5% of that limit is available for debris removal. See debris removal coverage.
Pennsylvania fire escrow
In Pennsylvania municipalities that adopted the state's fire insurance escrow law, the building permit is only one of two municipal papers you need. Before the insurer can pay a fire claim over $7,500 on a structure, the municipality must issue a certificate, and any unpaid property taxes come out of the claim first. Ask the code or tax office what it needs for that certificate when you apply for your permit, so the two do not hold each other up. On large losses the municipality also keeps part of the claim until the building is repaired, secured or removed, and your permit file and final inspection are what it looks at before releasing that money. See the Pennsylvania fire escrow act for the amounts.
Use inspections to document hidden damage
The permit process opens walls and ceilings in stages. Before each area is closed, take photos of framing, wiring and insulation. If you find charring or smoke damage that was not in the estimate, ask the adjuster to see it before the drywall goes up. Photos taken at the rough-in inspection are often the only proof of what was inside the walls.
Common questions
Do I need a permit to repair fire damage?
For structural, electrical, plumbing, HVAC and roofing work, usually yes. Cleaning and painting often do not. Check with your local building department.
Does insurance pay for permit fees?
Yes. Permit and plan review fees are part of the cost of repair. Make sure the estimate includes them.
What if the inspector requires upgrades the insurer did not include?
Send the inspector's written requirements to the adjuster as a supplement. Ordinance or law coverage pays for many of these. See rebuilding after a house fire.
Who pulls the permit for fire repairs?
Usually your licensed contractor. Some areas let homeowners pull their own permits, but then the code responsibility is yours.
Can the city hold part of my insurance money?
In some places, yes. Pennsylvania municipalities that adopted the fire escrow law can hold part of a large fire claim until the building is repaired or removed.
Help with code and permit issues in your claim
ClaimWarriors identifies permit and code requirements early and documents them for the insurer. See our fire claim services, or contact us for a claim review.
This article is general information, not legal or building code advice. Permit rules vary by jurisdiction; check with your local building department. Last reviewed November 2026.



