Ordinance or Law Coverage After a Fire: Paying for Code Upgrades

Most homes are not built to today's building code. That is fine until a fire forces repairs. Once a permit is pulled, the building department can require the repaired or rebuilt home to meet current code. The extra cost can be large, and your regular dwelling coverage does not pay it. Ordinance or law coverage does, up to a limit. This is one of the most frequently underused coverages in fire claims.
What ordinance or law coverage pays for
The standard homeowners policy (HO-3) includes ordinance or law coverage as an additional amount of insurance, on top of the dwelling limit. It lets you use up to 10% of your dwelling (Coverage A) limit for increased costs you incur because a law or ordinance requires or regulates:
- The construction, demolition, remodeling, renovation or repair of the part of the building damaged by a covered peril.
- The demolition and reconstruction of the undamaged part of the building, when the whole building must be torn down because of covered damage to another part.
- The remodeling, removal or replacement of part of the undamaged building when that is necessary to complete the repair of the damaged part.
It can also pay the increased cost of removing debris from that work. It does not pay for the loss in value of a building because of a code requirement, or for costs related to pollutants.
Many insurers sell endorsements that raise the limit to 25% or 50% of Coverage A. Check your declarations page.
Coverage A, B and C: the three-part version
Some homeowners endorsements and most commercial policies split ordinance or law coverage into three parts. The names can be confusing because they reuse letters from the main policy:
- Coverage A (loss to the undamaged portion): the value of the undamaged part of the building that must be torn down because of code.
- Coverage B (demolition cost): the cost to demolish the undamaged part and clear the site.
- Coverage C (increased cost of construction): the extra cost to rebuild to current code.
If your policy uses this structure, each part may have its own limit, or they may share one.
Common fire-related code upgrades
- Electrical: arc-fault and ground-fault protection, panel upgrades, new circuits, hardwired interconnected smoke and carbon monoxide alarms. See electrical fire insurance claims.
- Energy code: insulation levels, window performance and air sealing when walls and ceilings are opened.
- Structural: framing, connections, foundation and seismic requirements in some areas.
- Egress and safety: bedroom egress windows, stair and guard rail dimensions.
- Wildfire construction: in many western wildfire areas, ignition-resistant roofing, siding, vents and windows when rebuilding.
- Fire sprinklers: some jurisdictions require them in new construction or substantial rebuilds.
- Floodplain rules: in a mapped flood zone, a fire that causes substantial damage can trigger local floodplain rules requiring the rebuilt home to meet elevation requirements.
Why the limit runs out
On a total loss, 10% of the dwelling limit is often not enough to cover all the code-driven costs, particularly in older homes or wildfire areas. Before rebuilding, compare your ordinance or law limit with the code items your contractor and building department identify. If the limit will not cover everything, you will want to know early, so you can make design choices and pursue every other coverage that applies.
If the limit runs out, see underinsured after a house fire.
How to document code upgrade costs
- Get the requirements in writing. Plan review comments, inspection reports or a letter from the building department showing what must be upgraded and which code section requires it.
- Have the contractor separate code work from like-for-like repairs in the estimate, item by item.
- Make sure code items are not hidden in the dwelling estimate or excluded entirely. Insurer estimates sometimes leave code items out with a note that they will be considered when incurred.
- Keep invoices. Because the coverage pays costs you incur, many insurers pay code upgrades after the work is done.
- Watch deadlines. The same replacement cost deadlines that apply to recoverable depreciation often apply here. See recoverable depreciation after a fire.
See fire damage repair permits and rebuilding after a house fire.
Ordinance or law and total losses
When a fire-damaged home must be demolished because what remains cannot meet code, ordinance or law coverage can help pay for demolition of the undamaged part and the increased cost of construction. This is often where the coverage matters most. Our guide to a total loss house fire explains how it fits with the dwelling limit, debris removal and extended replacement cost.
An illustrative example
The numbers below are illustrative only. Say a 1960s home has a dwelling limit of $400,000 and the standard 10% ordinance or law coverage, which adds $40,000. After a kitchen fire, the building department requires a new electrical panel, arc-fault protection on the rebuilt circuits, interconnected smoke alarms and more insulation in the opened walls. The contractor prices those code items at $55,000.
The like-for-like repair is paid under the dwelling coverage. The first $40,000 of code work is paid under ordinance or law, usually once the work is done. The remaining $15,000 is the homeowner's cost unless another coverage applies. With a 25% endorsement, the code limit would have been $100,000, and the full $55,000 would have fit.
Other coverages that sit next to it
Ordinance or law is one of several additional coverages in a standard HO-3. Debris removal is another. If the cost of removing debris uses up the dwelling limit, the standard form adds 5% of that limit for debris removal. Trees, shrubs and plants have their own coverage of 5% of the dwelling limit, with a $500 cap per tree.
Extended replacement cost works differently. It is an endorsement that raises the dwelling limit by a set percentage, often 20% to 25%. Whether that extra amount can also go toward code costs depends on the endorsement wording, so check it before you plan the rebuild. See debris removal coverage and extended vs guaranteed replacement cost.
If you do not rebuild
Because the coverage pays increased costs you actually incur, it generally does not pay if you sell the lot or decide not to rebuild. California, Colorado and Oregon have rules that let you rebuild at another location or buy a replacement home after certain losses without losing replacement cost benefits. How code costs are handled in that case depends on your policy and your state. Ask the adjuster to explain it in writing before you decide. See selling a fire-damaged house.
Common questions
How much ordinance or law coverage do I have?
The standard form provides 10% of the dwelling limit as additional coverage, and endorsements can raise it to 25% or 50%. Check your declarations page.
Is ordinance or law coverage paid before repairs?
Usually not. It generally pays costs you actually incur, so it is often paid after the work is done.
Does it pay for upgrades I choose myself?
No. It pays for upgrades the law requires because of the covered repair, not improvements you choose on your own.
Does ordinance or law coverage apply if only part of the house burned?
Yes. It applies to code-required work on the damaged part of the building, so a partial fire that opens walls or replaces an electrical panel can trigger it. A total loss is where the cost is usually highest.
Can I add ordinance or law coverage after a fire?
No. The limit that applies is the one in your policy on the date of the fire. If you are rebuilding, review your new policy so the rebuilt home has enough code coverage for any future loss.
Do not leave this coverage on the table
Code upgrades are a common reason fire claims fall short of real rebuild costs. ClaimWarriors identifies code requirements early and documents them for the insurer. See how we handle fire damage claims, or contact us for a claim review.
This article is general information about property insurance claims, not legal advice. Coverage depends on your policy form and endorsements. Last reviewed November 2026.



